Generally, we can provide 88um, 113um and 152um thickness for your choice.
The size of pouch cell case can be customized, please provide detailed information, we can design for you.

Pouch Cell Case Dimensions	The dimension can be customized according to your requirements
Aluminum laminated film  thickness	113μm	152μm	88μm
Materials constitute
Surface quality	Mat finish
Pinholes	Subject to the applicable aluminum foil standard
Impurity	1mm or less in diameter
Fish Eye	2mm or less in diameter (clear),1mm or less in diameter (colored)
Molding Depth	≥5.0mm
Electrical Insulating	Good
Hot Sealing Coniditon	180-190°C
Moisture Vapor / O2 Transmission Rate	200ppm / 5 years
Heat Seal Strength	More than 22.5N/15mm wide at 200℃ x 0.2Mpa x2 sec by TOB heat sealing
Solvent Retention	Less than 5mg/m2
Appearance	Within the sample of the limit
Slip Factor	CPP/CPP   less than 1.0
Application Notes	Click the picture below to see the finished polymer Li-Ion battery made by heated sealer