It is a dual jar high energy ball mill with 3D movement which can mill two types of powder into nanoscale at the same time.It has a higher impact force created by three-dimensional movement, e.g. rotation, vibration and oscillation with frequency up to 1000 RPM. The 24VDC motor is built-in with the separated and programmable control unit, which can be operated inside a glovebox with Argon gas.
SPECIFICATIONS:
| Features | Dual jar design for milling two types of the sample at the same time.The 24VDC motor allows use in Ar gas environment.RPM with the separated control unit.Two sets of mill jars ( SS and nylon, a total of 4 jars ) are included for immediate use.Two years warranty |
Standard Milling Jars & Media | Two 80 ml Nylon Jars with 2 sets of Zirconia milling balls (4 pcs of 11.5 mm, 10 pcs of 10 mm, and 10 pcs of 8mm) are included. It is suitable for grinding / milling the materials with minimized contamination. Two 80 ml Stainless Steel Jars with 2 sets of SS milling balls (2×20 pcs) are includedOption: High Throughput 4 Milling Cavities (9ml each) Stainless Steel Mixing Jar is available for an extra cost.Attention: Max. feeding capacity: < 1/3 jar’s |
| Power Input | Single-phase 110VAC or 240VAC 50/60Hz with The USA plug ( Change switch inside power supply )Power consumption: 120 W |
| Control Unit | The separated control box for remote operation in a glove box or fume hood. ( If using inside the glove box, you need to order KF40 feedthrough at the extra cost of $600.00)Speed control: 300 – 1000 rpm adjustable; Below 250 RPM may result in strong resonance frequency.Time control: 0 – 30 minutes adjustable Three segments programmable via color touch screen for forwarding rotation, backward rotation, and running time The estimated acceleration gravity: ~ 50G |
| Feeding Granularity | <1mm |
| Discharging Granularity | 0.1 micron minimum for certain material ( Mainly ceramic material ) Note: To achieve finer or desired particles via ball mill is a research project, which is dependent on the material to be milled, grinding time and speed, combination of grinding jar and milling ball etc. It is the user’s responsibility to find the best milling procedure based on the material. Buyers are welcomed to MTI laboratory at California test before purchase. |
Click one of our contacts below to chat on WhatsApp
