Description

• Dimensions: Length 1150mm X Width 650mm X Height 1800mm;
• The Weight Of The Whole Machine: 800kg;
• The Ratio Of Total Weight To Load-Bearing Area: ≤1500kg/M²;
• It Is Supported By Rollers + Feet, Which Is Convenient To Move And Fix;
• Control Electrical Box Size (Length X Width X Height): ≤ Length 500mmX Width 250mmX Height 630mm;

Equipment Production Capacity:

• Design Volume: 14L; Effective Use Volume: 10L;
• Qualified Rate Of Equipment Produced By The Equipment: ≥98%;
• Mean Time Between Failures Of Equipment MTBF: ≥3000H (Excluding Poor
  Incoming Materials And Influencing Factors Such As Plant Power Supply And Gas
  Supply);

Specification Of Mixing Tank:

• Inner Diameter Φ300mm, Depth 200mm;
• Using SUS304 Material, Precision Turning, Precision Grinding, Double-Layer
  Stainless Steel Water Solvent;

Revolution:

• Two Sets Of Twist Frame Type Mixing Paddles, SUS304 Material, Integral Casting
  Molding, Precision Machining;
• Main Stirring: Planet Carrier Speed: 0~50rpm; Stirring Paddle Speed: 0~100rpm;
• Frequency Conversion Speed Regulation, Forward And Reverse Design;
• Power Of Revolution Motor: 1.5kW;

Rotation:

• A Set Of Dispersing Shafts: Each Shaft Is Equipped With Two 60mm Diameter;
• SUS304 Material;
• Dispersion Speed: 0~5320rpm;
• Cutting Speed: Vmax=23m/S;
• Rotating Motor Power: 2.2kW;
• The Ultimate Vacuum Can Reach -0.098Mpa, Automatic Control (Matching Rotary
• Vane Vacuum Pump Model: 2ZX-2):
• (Test Method: Vacuum≤-0.090Mpa, Close The Vacuum, After 4 Hours≤
• -0.080Mpa);
• Temperature Control: Pt100 Temperature Sensor Directly Contacts The Material, The
• Measurement Is More Accurate, And The Reaction Speed Is Faster;
• 1 Imported Cooling Water Pneumatic Ball Valve, Temperature Range 0-80℃, Temperature Difference ±1℃, Response Time 1℃/5s;
• The Temperature Measurement Point Is Located In The Barrel, And The Temperature
• Measurement Point Moves With The Revolution In The Material 1/3 Away From The
• Bottom Of The Material Tank;
• Equipment Manufacturing And Assembly Accuracy:
• The Gap Between The Stirring Paddle And The Container Wall: 3.0±1.0mm;
• The Gap Between The Stirring Paddle And The Bottom Of The Container: 3.0±
• 1.0mm;
• The Gap Between The Stirring Paddle And The Stirring Paddle: 3.0±1.0mm;
• Lifting Stroke: 250mm; Lifting Method: Lifting Screw Lifting, Barrel Lifting; Lifting
• Motor Power: 0.55kW;
• Control System:
• The Operation Panel Adopts Button Control;
• The Revolution And Rotation Motors Are Respectively Controlled By The Inverter;
• The Electric Box Adopts A Closed Structure, And The Electric Box Body Adopts
• Compressed Air Cooling Method;
• Forward And Reverse Design, Slow Mixing Design;
• Safety Protection:
• There Is An Alarm When The Container Drops And Rises;
• The Plugging And Unplugging Of The Thermometer Is Interlocked With The Movement
• Of The Tank;
• The Stirring Shaft Can Rotate Only After The Container Is Raised In Place;
• When The Stirring Shaft Rotates, The Container Cannot Be Lowered;
• When The Motor Current Exceeds The Range, It Will Automatically Stop;
• Grounding Of Mixer And Control Cabinet;
• Automatic Protection Of Electrical Appliances; Emergency Stop Protection For
• Operators;
• Two Explosion-Proof Limit Switches To Prevent The Machine From Working When The
• Mixing Container Is Removed;
• Overall Technical Parameters Of The Equipment:
• Total Power: 4.5kW;
• Ultimate Vacuum: ≤-0.098MPa;
• The Positive Pressure Of The Water-Cooled Jacket Of The Mixing Tank: ≤0.3MPa;
• 1000 Measurement Away From The Operating Position Or The Outer Wall Of The
• Equipment, Equipment Noise: ≤80FB