1. The head is made of copper material, which has good heat transfer effect, saves power consumption, improves work efficiency, and is more energy than similar products;
2. The pressure of the upper and lower head can be adjusted by the pressure regulator to achieve different process parameter requirements;
3. The upper and lower head is driven by the cylinder through two linear guide sleeves, and the upper and lower movement is difficult to ensure the parallelism of the product after the edge sealing;
4. Through the perspective window, changes in the cavity can be observed during work.
5. Can be applied to different specifications of product batteries, and the adjustment is simple and convenient.
6. The split design of the main machine and the control box enables the machine to work in the glove box or on the assembly line.
7. The product has multi-stage cycle operation function. Helps the electrolyte blend more fully.
8. The upper chamber is driven by the cylinder, guided by two linear bushings, flexible up and down movement, accurate guidance to ensure product sealing requirements.
9. Good appearance, small size, light weight.
10.PLC+ touch screen control, easy to operate.

Parameter：

1.PLC touch screen automation control;
2. The cavity is made of aluminum alloy welding, corrosion resistance, solid structure;
3. Adjustable standing time, adjustable pressure;
4. Vacuum degree can reach -95KPa or more (self-supplied vacuum pump);
5. Head temperature: normal temperature -260℃, temperature adjustable;
6. Temperature control accuracy :±2℃;
7. Heat seal pressure :0-7Kg/cm2 adjustable;
8. Heat sealing time: 0-9995 adjustable;
9. Edge width :3~15mm(can be customized according to requirements);
10. Maximum (effective) edge sealing size: 180mm;
11. Sealing copper rod length :200mm
12. Max battery discharge range 200 long, 200mm wide (including gas pocket)

13. Seal thickness range :60-500um
14. Sealing thickness accuracy (mm): any two point package thickness difference < 15um
15. Air consumption: about 0.2L compressed gas/once per seal.
16. Power: 300w heating tube, heating power consumption of about 0.6KW.
17. Power supply: 220V/50Hz;
18. Compressed air source: 0.4-0.7Mpa; Use in the glove box;
19. Cavity volume :L425mm*W350mm*H170mm;
20. Equipment dimensions
The action part of the execution chamber: about L600mm*W450mm*H630mm
Control part: about L560mm*W220mm*H340mm
21. Weight: about 130KG

22. With cutting knife on the back of sealing rod for piercing purpose.

23.The cutting knife can be removed to change to 2 in 1 degassing and sealing machine.