Acceleration Impact Testing Machine

This Machine Is Mainly Suitable For Shock Resistance Tests In Electronic Products, Aerospace, Shipbuilding, Military Industry, Auto Parts, Transportation And Other Fields. By Choosing Different Waveform Generators, Impact Tests Such As Half Sine Wave, Trailing Peak Sawtooth Wave Or Square Wave Can Be Carried Out.

Environmental Requirements:

Site Temperature: 5℃~+28℃ (Average Temperature Within 24 Hours≤28℃);
Relative Humidity: ≤85%RH;
Air Source: 0.5–0.8MPa
Power Supply Conditions: Single-Phase Three-Wire;
Voltage Range: AC220V;
Allowable Frequency Fluctuation Range: (50±0.5) Hz;
The Grounding Resistance Of The Protective Earth Wire Is Less Than 4Ω;
The User Is Required To Configure An Air Or Power Switch With Corresponding Capacity For The Equipment At The Installation Site, And This Switch Must Be Independent For The Use Of This Equipment.

Technical Parameter:

Work Platform	250 × 250mm	350 × 350 Mm
Maximum Load	10kg	30kg
Work Surface Material	High-Strength Imported High-Quality
Aluminum Alloy	Maximum Drop Height 1500mm
Peak Acceleration	20-1000 G
Pulse Duration	0.5-20ms
Equipment Size	650 × 700 × 2370mm
Total Equipment	820 Kg
Aeasuring System
Input Channel	2 Channels
Sampling Frequency	192KHz
Input Form	Voltage, Charge
Voltage Range	-10V–+10V
Coupling Mode	AC, DC, ICP
Pulse Duration	50—1ms
Shock Waveform	Half Sine
Communication Interface	USB2.0
Support Standards	National Standard, National Military Standard, U.S. Military Standard, User-Defined Standard
Operating System	Microsoft Windows7/10
System Acceleration Sensor
Brand	LAB
Output Method	Charge Type
Sensitivity	3.93pC/G
Frequency Range	0.5-12KHz
Acceleration Range	±2500G
Working Environment	-40~+160℃
Other Instructions
Power Supply	AC 3-Phase 380V±10% 5KVA
Compressed Air	0.5-0.8Mpa
Temperature	RT～40℃
Humidity	25℃＜85RH％

Quick Inquire

Acceleration Impact Testing Machine

Acceleration Impact Testing Machine

Discover Cutting-Edge Battery Solutions Now!

Hello!