Product introduction

This equipment is mainly suitable for packaging the top and side of flexible packaging batteries.

Product features

*Unique safety protection, anti-scalding design, the temperature of the upper and lower hot head can be adjusted by the thermostat panel button and the current value of the temperature;

*It adopts a split structure and is easy to enter the glove box for operation.

*The head is made of copper material, which has good heat transfer effect to save power consumption, improve work efficiency, and save energy than similar products;

*The pressure of the lower head can be adjusted by the pressure regulator to achieve different process parameter requirements;

*The cylinder drive for the upper and lower head is guided by two linear guide sleeves, and the upper and lower movements are flexible, and the guidance accurately ensures the requirements of parallelism after the sealing edge of the product;

*It can be applied to different specifications of product batteries, and the adjustment is simple and convenient, without adjusting and replacing the head;

*The frame is made of aluminum profile, which has a beautiful appearance; Lingjin adopts three-dimensional geometric design, simple and beautiful;

*The external dimension is small, the sealing mark is flat and uniform, and the sealing edge appearance is beautiful;

Main parameters

*It adopts a split structure and is easy to enter the glove box for operation

*Applicable specifications: side seal S190mm, top seal 190mm (including air bag)

*Sealing length: 200mm

*Sealing width: standard 5mm+0.3 (2~10mm optional)

Other widths of the seal can be replaced

*Heat sealing temperature: room temperature ~ 250C (temperature adjustable)

*Temperature control accuracy: 士2°C

*Package time: standard 25-3S (0-99s adjustable)

*Seal thickness accuracy: the difference between the thickness of any two points is <15um

*Equipped with protective device to prevent high temperature scalds

*Compressed gas: 5~8kg/cm2

It is recommended to use the same gas in the glove box

*Power supply: AC220V/50HZ

*power:0.5KW

*Form factor:

Work section: L315xW150xH290mm

Control section: L320xW240xH220mm

*Device weight: 20Kg